®
LUX-top
G-T
DIREKT
a)
Measure the positions of the basic
elements according to the installation
requirements, draw on and drill (clean
the drillhole if necessary and apply
corrosion protection)
b)
Mount the basic elements using the
appropriate fixings kit:
-
Concrete fixing kit*
-
Steel fixing kit
-
Adapter plate fixing kit
*Note and follow the installation instructions of the fixings manufacturer
®
LUX-top
G-T
DIREKT
a) Preassemble the basic elements on
the adapter plates
Important:
Note
direction!
b) Measure and drawn on the positions
of the basic elements according to the
installation requirements
c) Stick the sealing strips onto the
underside of the adapter plate
d) Align the basic elements with the
middle and drill through the adapter
plate into the top rails (metal drill bit
Ø 8 mm)
e) Set 8 Bulb-Tite rivets using a special tool
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection solutions – www.lux-top-absturzsicherungen.de
- basic element
- RVT adapter plate
the
installation
Page 21 Version 05/2019