Sliding Body Shelves; Egg Tray; Crisper; Chiller Compartment - Beko GNE134631X Manual Del Usario

Ocultar thumbs Ver también para GNE134631X:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Egg tray

You can install the egg holder to the
desired door or body shelf.
Never store the egg holder in the
freezer compartment

Sliding Body Shelves

Sliding body shelves can be pulled
by slightly lifting up from the front and
moved back and forth. They come to
a stop point when pulled towards front
to allow you reach the foods placed at
the back of the shelf; when it is pulled
after slightly lifted upwards at the
second stop point, the body shelf will
be released.
The shelf should be hold tightly from
the bottom as well in order to prevent
it from tipping over. The body shelf is
placed on the rails at the sides of the
refrigerator body by bringing it to one
lower or one upper level.
The body shelf should be pushed
backwards to seat it completely.
1
2
3
4

Crisper

Crisper of your refrigerator is designed
specially to keep your vegetables
freshly without loosing their humidity.
For this purpose, cool air circulation
occurs around the crisper in general.
Remove the door shelves that align
with the crisper before removing the
crispers. You can remove the crispers
as illustrated in the figure.

Chiller compartment

Chiller compartments enable the
foods to be frozen become ready
for freezing. You can also use these
compartments to store your food at a
temperature a few degrees below the
fridge compartment.
You can increase the inner volume of
your refrigerator by removing any of
the chiller compartments. To do this,
pull the compartment towards yourself;
the compartment will lean against the
stopper and stop. This compartment
will be released when you lift it about 1
cm and pull it towards yourself.
26
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido