Connecting To Pc; Connecting Via Rs-232; Connecting Via Cradle - BZ-TECH Bematech DC-2000 Manual Del Usuario

User´s Manual DC - 2000 - Ver1.0

2.4Connecting to PC

To use the software supplied with the data collector, it must be connected to a
PC.

2.4.1 Connecting via RS-232

To connect the data collector to a PC via RS-232 port:
1.Connect the RS-232 DB9 (F) cable to the communication port of the data
collector.
2.Connect the other end of the RS-232 DB9 (F) cable to a RS-232 serial port on
the computer.
3.Make sure the unit is turned on after the cable is connected.

2.4.2 Connecting via Cradle

To connect the data collector to a PC using the cradle:
1.Place the DC-2000 on the cradle.
2.Attach the cable from the cradle to the RS-232 or USB interface on your PC
depending on the type of cradle you are using.
3.Connect the power adapter to the cradle when necessary.
4.Make sure the unit is turned on after the cable is connected.
33