BZ-TECH Bematech DC-2000 Manual Del Usuario página 50

User´s Manual DC - 2000 - Ver1.0
3.If there is another file to be uploaded, its name will then be displayed on the
screen. Repeat the above procedure to choose and confirm.
4.Ready to upload screen appears. Press Enter to begin upload.
Delimiter Set
1.Select "System Menu>4.Upload>2.Delimiter Set" to enter the setup screen.
2.Select a parity characters as the Field Delimiter: None, ,, ;, Space, CRLF, CR,
and LF.
3.Select a parity characters as the Record Delimiter: None, ,, ;, Space, CRLF, CR,
and LF.
4.To decide whether the Upload Header is to be uploaded, press the left or right
arrow buttons to change the value to On or Off. Press Enter to confirm.
Upload Device
1.Select "System Menu>4.Upload>3.Upload Device" to enter the setup screen.
2.Use the left or right arrow buttons to select the device for uploading: RS-232
or USB.
3.Make sure the device is connected to the PC and press Enter to begin
uploading.
49