Running The Device On Pc; Setting The Device On Pc - BZ-TECH Bematech DC-2000 Manual Del Usuario

User´s Manual DC - 2000 - Ver1.0

2.4.3 Running the Device on PC

1.Install and run WinTaskGen on your PC.
2.For USB connections, please install and run the virtual COM port driver.
3.Check "Define comport long parameters" checkbox on top if necessary. Extra
options appear as shown below when you check this optio
4.Select the options from the dropdown menu. When you define
communication protocols, you must set the same value with the device.
COM options: Select the COM port the device is connected to.
•
Baudrate options: 4800,9600,19200,38400,57600,115200.
•
Parity options: Even, Mark, None, Odd, Space.
•
DataBits options: 8,7.
•
StopBits options: None, One, OnePointFive, Two.
5.After the parameters are set, the device is automatically detected.

2.4.4Setting the Device on PC

1.Follow the previous instructions to connect the data collector.
2.Select the "Remote Settings" tab on the Main Menu. Click the "Device
Settings" to obtain the device status.
34