BZ-TECH Bematech DC-2000 Manual Del Usuario página 48

To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to exit.
Advance Setup
Select "System Menu>3.Setup>3.Barcode Setup>2.Advanced Setup" to enter the
setup. The following options appear:
CPC 25
1.To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to confirm.
2.When CPC 25 is set to "ON", pressing M2 will lead to more options:
•
CPC 25 CDV: On, Off.
•
CPC 25 CKD: Send, No Send.
•
CPC 25 Length: Enter length 1 to 64 for the Min/Max length.
Select the appropriate parameters and press Enter to setup the next
symbology.
EAN to ISBN/ISSN
To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to setup the next symbology.
EAN-13 Digits
To set the digits, press the left or right arrow buttons to change the value to 12
or 13 and press Enter to setup the next symbology.
EAN-8 Digits
To set the digits, press the left or right arrow buttons to change the value to 7
or 8 and press Enter to setup the next symbology.
IATA Code
To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to setup the next symbology.
Codebar ST/SP
To set the parameters, press the left or right arrow buttons to change the value
to"ABCD" or "a/t, b/n, c/*, d/e" or "DC1, DC2, DC3, DC4" and press Enter to go back
to the Barcode Setup screen.
User´s Manual DC - 2000 - Ver1.0
47