BZ-TECH Bematech DC-2000 Manual Del Usuario página 47

User´s Manual DC - 2000 - Ver1.0
Select the appropriate parameters and press Enter to setup the next
symbology.
F ASCII Code 39
To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to setup the next symbology.
Codabar
1.To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to confirm.
2.When Codabar is set to "ON", pressing M2 will lead to more options:
•
Codebar CDV: On, Off.
•
Codebar ST/SP: Send, No Send.
•
Codebar CKD: Send, No Send.
Select the appropriate parameters and press Enter to setup the next
symbology.
ITF 25
1.To turn this symbology on or off, use the left or right arrow buttons to change
the value and press Enter to confirm.
2.When ITF 25 is set to "ON", pressing M2 will lead to more options:
•
Codebar CDV: On, Off.
•
ITF 25 CKD: Send, No Send.
•
ITF 25 Length: Enter length 2 to 64 for the Min/Max length.
Select the appropriate parameters and press Enter to setup the next
symbology.
Código 128 (Code 128)
1.Para ligar ou desligar (ON/OFF) a simbologia, use as setas direita e 1.
turn this symbology on or off, use the left or right arrow buttons to change the
value and press Enter to confirm.
2.When Code 128 is set to "ON", pressing M2 will lead to more options:
Enable EAN 128: On, Off.
Code 128 Length: Enter length 1 to 64 for the Min/Max length.
Select the appropriate parameters and press Enter to setup the next symbol
Code 93
46
To
ogy.