Wiko FREDDY Guía De Usuario página 13

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
the latter might cause a short-circuit between the
positive and negative terminals of your batteries and
permanently destroy the battery or phone.
As a general rule, you should not expose the batteries
to very low or very high temperatures (below 0°C or
above 45°C). Differences in temperature may reduce
battery autonomy and service life. It is recommended
to recharge the battery at a room temperature of 5
to 25 °C. To increase battery life, only use the WIKO
battery and charger supplied in the box. Incorrect use
of the battery may cause fire, explosion or other risk.
12.
Shocks and impact: Handle and use your phone
with the utmost care.
Protect your phone: shocks and impact may damage
it. Some parts of your phone are made from glass
and might break if the phone is dropped or is subject
to severe impact. Avoid dropping your phone. Do not
touch the screen with sharp objects.
13.
Electric shock: Do not try to dismantle your phone
as there is a very real risk of electric shock.
14.
Maintenance: If you want to clean your handset,
use a dry cloth (do not use a solvent, such as benzene,
or alcohol).
15.
Recharge your phone in a well ventilated area.
Do not recharge your device when it is resting on a
soft surface.
16.
Damage to magnetic strips: Keep your phone
away from credit cards as it may damage the data on
the magnetic strips.
17.
Do not use the mobile phone in an environment
at too high or too low temperature, never expose
the mobile phone under strong sunshine or too wet
environment. The suitable temperature for the phone
is -10°c to +45°c, the maximum charging temperature
declared by the manufacturer is +40°c.
18.
Due to the used enclosure material, the GSM
mobile phone should only be connected to a USB
Interface of version 2.0 or higher. The connection to
so called power USB is prohibited.
19.
The power adapter is the disconnect device for

Publicidad

Tabla de contenido
loading

Tabla de contenido