Assembly Instruction - POWER SMITH PWL110S Manual Del Operario

ASSEMBLY INSTRUCTION

ATTACHING THE HOOK (FIG 2)
Attach the metal hook (1) to the bracket (2) using the bolt,
washers and nut, as shown in FIG 2.
ON/OFF SWITCH
Your work light is equipped with an ON/OFF switch (8-FIG1) on the back side of the work light. Press the switch
once to turn the work light on and press the switch a second time to turn it off. Always turn the work light off before
unplugging.
Your work light requires very little care and maintenance. Simply clean the lens regularly with a non-abrasive cleaner.
Use the similar care for the stand.
WARNING:
completely cool before attempting to clean it.
This product is warranted free from defects in material and workmanship for 2 (Two) years after date of purchase. This
limited warranty does not cover normal wear and tear or damage from neglect or accident. The original purchaser is
covered by this warranty and it is not transferable. Prior to returning your product to store location of purchase, please
call the Toll-Free Help Line for possible solutions.
ACCESSORIES INCLUDED IN THIS KIT ARE NOT COVERED BY THE 2 YEAR WARRANTY.
For questions about this or any other PowerSmith™ product,
888-552-8665
Please call Toll-Free:
www.powersmithproducts.com
Or visit our website:
©Richpower Industries, Inc. All Rights reserved
Richpower Industries, Inc.
736 Hampton Road
Williamston, SC 29697
Printed in China, on recycled paper
English
OPERATION
MAINTENANCE
Always make sure the work light is unplugged and
WARRANTY
HELP LINE
4
1
2
FIG 2