Bissell POWERFORCE 1668 Serie Guia Del Usuario página 5

Maintenance:
Cleaning Filters
Pre-Motor Filter Cleaning Instructions
1
3
5
Clean all filters with mild detergent, rinse and squeeze out all
excess water.
Allow filters to dry for 24 hrs before reassembling.
Ensure black sponge layer of filter faces out into the bag
compartment when replacing.
www.BISSELL.com
8
2
4
Remove bag
to access the
pre-motor filter
underneath.
Once bag is removed, located
and remove the pre-motor filter
by pulling it up and out of unit.
Maintenance:
Post-Motor Filter Cleaning Instructions
1
Pull handle
to open
Turn unit to find the back.
3
Pull filter
up to remove
Post-Motor
Filter
Lift post-motor filter cover up on
back of unit to access filter.
5
Remove post-motor filter from
back cover
Cleaning Filters
2
Locate post-motor filter cover on
back of unit by cord rewind.
4
Open to
access filter
Locate post-motor filter on back cover.
6
Lift filter
to remove
Clean all filters with mild detergent, rinse and squeeze
out all excess water.
Allow all filters to dry for 24 hrs before reassembling.
Place the filter over the 2 tabs in the back cover to align
correctly when replacing.
Lift tab
to open
Post-Motor
Filter
www.BISSELL.com
9