Hammerhead HLLT10 Manual Del Usuario página 12

OPERATION
8. LASER DOT ALIGNMENT
This digital laser level contains a laser diode located inside the left endcap.

WARNING: When turning on the self-leveling cross laser, always be aware of
protecting your eyes and the eyes of those around you.
a. To activate the laser, press in the laser ON/OFF button located on the right endcap
of the digital laser level. The working range will extend up to 300 feet away to
enable you to level large areas (This range is only applicable at night or in a dark
environment).
NOTE:
• The center of the laser beam is 1-3/16 inch above the bottom (working) surface of
the digital laser level. Remember to account for this when doing layouts and taking
measurements.
• The dot size and shape may change slightly with distance, temperature or target surface
material. The point to use is the center of the dot pattern.
b. The digital laser level can also be mounted on a standard 1/4 inch tripod (not in-
cluded) to project a series of laser dots on walls. This feature is perfect for home
improvement projects such as aligning pictures, chair rails and other wall fixtures,
plumbing runs, and many other uses.
12 10" / 24" / 48" DIGITAL LASER LEVEL