Michelin MBL 6 Manual De Uso Y Mantenimiento página 7

SAVE THESE INSTRUCTIONS AND MAKE THEM AVAILABLE TO
OTHER USERS OF THIS TOOL!
IMPORTANT INFORMATION
Read and understand all the operating instructions, safety precautions
and warnings in the user guide before operating or maintaining this
compressor. Most accidents that result from compressor operation and
maintenance are caused by the failure to observe basic safety rules or
precautions. An accident can often be avoided by recognizing a
potentially hazardous situation before it occurs, and by observing
appropriate safety procedures. Only use the compressor
recommended by the manufacturer.
SAFETY
(IMPORTANT SAFETY INSTRUCTIONS FOR THE USE OF THE
COMPRESSOR)
1. NEVER TOUCH MOVING PARTS
2. NEVER OPERATE WITHOUT ALL GUARDS IN PLACE
3. ALWAYS WEAR EYE PROTECTION; compressed air must never
be aimed at anyone or any part of the body.
4. PROTECT YOURSELF AGAINST ELECTRIC SHOCK; prevent
body contact with grounded surfaces such as pipes, radiators, ranges
and refrigeration enclosures. Never operate the compressor in damp
or wet locations.
5. DISCONNECT THE COMPRESSOR from the electric mains before
operating, inspecting, servicing and cleaning the unit and before
replacing or checking any parts.
6. ACCIDENTAL STARTING; do not move the compressor while it is
still plugged into the mains. Make sure that the main switch is turned
OFF before plugging the compressor into the mains.
7. STORE COMPRESSOR PROPERLY when not in use, the
compressor should be stored in a dry place.
8. RISK OF FIRE OR EXPLOSION; cluttered areas invite injuries.
Clear all work areas of unnecessary tools, debris, furniture etc. Risk of
electric shock – do not expose the compressor to rain and don't use it
in damp or wet locations. Keep work area well lit and well ventilated.
Risk of fire or explosion. Do not carry and operate the compressor or
any other electrical device near the spray area. Don't use the
compressor in the presence of flammable liquids or gases.
Compressor produces sparks during operation. Never use compressor
in sites containing lacquer, paint, benzene, thinner, gasoline, gases,
adhesive agents and other materials which are combustible or
explosive.
9. KEEP CHILDREN AWAY; please do not let other people come into
contact with compressor extension cable. All visitors should be kept
safely away from work area.
10. DRESS PROPERLY; do not wear loose clothing or jewelry. They
can be caught in moving parts. Wear protective hair covering to
contain long hair.
11. DO NOT MISHANDLE CABLE; never pull it to disconnect from the
plug socket. Keep cable from heat, oil and sharp edges and avoid
crushing it.
12. MAINTAIN COMPRESSOR
periodically and if damaged, have it repaired by an authorised service
facility. Inspect extension cords periodically and replace if damaged.
13. OUTDOOR USE EXTENSION CABLE; when compressor is used
outdoors, only use extension cable specially designed for use
outdoors.
14. STAY ALERT; watch what you are doing, Use common sense. Do
not operate compressor when you are tired. It should never be used by
you if you are under the influence of alcohol, drugs or medication that
make you drowsy.
15. CHECK DAMAGED PARTS AND AIR LEAKS; before further use
of the compressor, a guard or other part which is damaged should be
carfully checked to determine that the compressor will operate properly
and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting, air leaks and
any other conditions that may affect its operation. A guard or other part
that is damaged should be properly repaired or replaced by an
authorised service centre unless otherwise indicated elsewhere in the
user guide. Have defective pressure switches replaced by an
authorised service centre. DO NOT USE THE COMPRESSOR IF THE
PRESSURE SWITCH IS FAULTY.
16. USE THE COMPRESSOR CORRECTLY AND OPERATE THE
COMPRESSOR ACCORDING TO THE INSTRUCTIONS PROVIDED
HEREIN; never allow the compressor to be operated by children,
individuals unfamiliar with its operation or unauthorised personnel.The
compressor has been designed and manufactured exclusively to
produce compressed air. EVERY OTHER USE, DIFFERENT AND
NOT FORESEEN BY ALL
MANUFACTURER OF POSSIBLE CONSEQUENT RISKS. In any
event the use of the compressor different to that agreed in the
purchase order RELIEVES THE MANUFACTURER FROM ALL
inspect cable
WITH CARE;
INDICATED, RELIEVES THE
LIABILITIES WITH REGARD TO POSSIBLE MATERIAL DAMAGE
AND PERSONAL INJURY.
17. KEEP MOTOR AIR VENT CLEAN.
18. OPERATE COMPRESSOR AT THE RATED VOLTAGE as
specified on nameplates (tolerance +/- 5%).
19. NEVER USE A COMPRESSOR WHICH IS DEFECTIVE OR
OPERATING ABNORMALLY; if the compressor appears to be
operating unusually, making strange noises or otherwise appears
defective, stop using it immediately and arrange for its repair by an
authorised service centre.
20. USE ONLY GENUINE REPLACEMENT PARTS; non-original
as
replacement parts may void your warranty and can lead to malfunction
and result in injuries. Do not modify the compressor. Always contact an
authorised service centre for any repairs.
21. TURN THE MAIN SWITCH OFF WHEN THE COMPRESSOR IS
NOT IN USE; turn the main switch OFF (pos. «0») and unplug the
compressor from the mains.
22. DO NOT TOUCH HOT PARTS OF THE COMPRESSOR.
23. DO NOT STOP THE COMPRESSOR BY PULLING OUT THE
PLUG;
24. USE ONLY
ACCEPTABLE FOR PRESSURE OF NOT LESS THAN 125 PSI (8.6
BAR).
EXTENSION CABLE
Use only three-way extension cables that have three-pin connecting
plugs and three-pole sockets that accept the compressor plug. Do not
use extension cables that are damaged or squashed. An under-rated
cable will cause a drop in line voltage resulting in loss of power and
overheating. The table shows the correct size to use depending on the
length according to the following parameters (size in [mm
with maximum length of 20 mt.):
Fit the suction cups underneath the base of the unit as indicated.
Position the compressor on a flat surface or one with a max. inclination
of 10° in a well-ventilated area. If the surface is sloping and smooth,
make sure that the compressor does not move while in operation. If
the compressor operates on a shelf or the edge of a stand, ensure that
it does not fall off by securing it appropriately.
Make sure the main ON/OFF switch is turned OFF (pos. «0»). Plug
the compressor into the mains and turn the main switch ON (pos. «I»).
Connect the rubber hose or the spiral pipe in the dedicated pipe fitting.
This type of compressor without tank is equipped with a device that
automatically controls the maximum working pressure even when the
user is not using compressed air.
releases any excess air through an appropriate valve.
compressor does not stop automatically. Turn the main O/I switch OFF
to switch the compressor off.
Make sure that the power supply cable is unplugged from the mains
before starting any maintenance jobs on the compressor.
HOW TO RECTIFY SLIGHT ANOMALIES
Air leaks
These may depend on the poor seal of some of the pipe fittings within
the machine; check all the pipe fittings by wetting them with soapy
water.
The compressor fails to start
If the compressor fails to start, check:
- if all the wires are connected properly
- if the compressor is electrically powered (plugged in correctly, circuit
breaker tripped, blown fuses)
- Ambient temperature to ensure correct operating efficiency: 0°C
+25°C (MAX 45°C).
- When the compressor is not in use, turn the main switch OFF (pos.
«0»).
- 7-
RECOMMENDED AIR HANDLING
SAFETY
220/230 V 110/120 V
2 2
1,5 mm 2,5 mm
INSTALLATION
STARTING
The compressor automatically
MAINTENANCE
ATTENTION!
EN
PARTS
2
] for a cable
The