D-Link DES-1024D Guía De Instalación Rápida página 3

Installing Power Cord Clip
To prevent accidental removal of the AC power cord, it is recommended to install the
power cord clip together with the power cord.
A. With the rough side facing down, insert the
Tie Wrap into the hole below the power
socket.
Insert Tie Wrap to the Switch
B. Plug the AC power cord into the power
socket of the Switch.
Connect the power cord to the Switch
C. Slide the Retainer through the Tie Wrap until
the end of the cord.
Slide the Retainer through the Tie Wrap
D. Circle the tie of the Retainer around the
power cord and into the locker of the
Retainer.
Circle around the power cord
E. Fasten the tie of the Retainer until the
power cord is secured.
Secure the power cord
3