Control Signals; Complaints And Repairs; Guarantee; Service - Bosch Rexroth KE300 Manual Del Usuario

3 609 929 721/1.2 | KE300

7 Complaints and repairs

6.3

Control signals

The tightening cell communicates with the
superior controller via control signals. A PLC
assignment table determines which control
signals are assigned to the inputs/outputs.
The inputs/outputs are assigned in the
BS300 operating program.
For more information, please see:
– The online guide in the operating program
(Programming the assignment table)
– The system documentation, chapter 5
"Control signals" (3 609 929 918) (signal
description, sequence examples, and
chronological sequences).
7 Complaints and repairs
For complaints and repairs that require disas-
sembly, please send the KE300 fully assem-
bled to the supplier or our customer service
workshop in Murrhardt, Germany. Com-
plaints and repairs cannot be acknowledged
if this procedure is not followed.
8

Guarantee

We grant a 1-year-warranty for Rexroth ma-
chines (invoice or delivery note serves as
proof).
Damage caused by normal wear and tear,
overload, or improper handling are excluded
from the guarantee.
Electric Drives and Controls | Bosch Rexroth AG 19/52
9

Service

Bosch Rexroth AG
Competence Center Murrhardt
Service Schraub- und Einpress-Systeme
Fornsbacherstr. 92
71540 Murrhardt, Germany
Tel.: +49 (0)7192 22 231
Fax: +49 (0)7192 22 164
brssvc7.abteilung@boschrexroth.de
10

Sales

Bosch Rexroth AG
Electric Drives and Controls
Schraub- und Einpress-Systeme
Postfach 1161
71534 Murrhardt, Germany
Fax +49 (0)71 92 22-1 81
schraubtechnik@boschrexroth.de
http://www.boschrexroth.com/schraubtechnik