Casals AG115500 Instrucciones Originales página 3

English
ANGLE GRINDER
AG115500
Dear Customer,
Many thanks for trusting to Casals.
Thanks to its continuous effort, our innovation
and the strictest quality controls, Casals develops
electric Power Tools for the toughest jobs.
GENERAL POWER TOOLS SAFETY WARNING
WARNING Read all safety warnings and
all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury
Save all warnings and instructions for future
reference
The term "power tool" in the warnings refers to
your mainsoper ated (corded) power tool or battery-
operated (cordless) power tool.
Work Area Safety
Keep the working area clean and well lit.
Cluttered and dark areas invite accidents.
Do not operate power tools in explosive atmos-
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes. Keep children
and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical Safety
Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce
risk of electric shock
Avoid body contact with earthed or grounded sur-
faces, such as pipes, radiators, ranges or refrigera-
tors. There is an increased risk of electric shock if
your body is earthed or grounded
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock
Do not abuse the cord. Never use the cord for car-
rying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the
risk of electric shock
When operating the power tool outdoors, use an
extension cord suitable for outdoor use. Use a cord
suitable for outdoor use reduces the risk of electric
shock.
If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock
Personal Safety
CAUTION: Do not leave the appliance unattended
during use as there is a risk of an accident.
Do not touch the heated parts of the appliance, as
it may cause serious burns.
This appliance is only for domestic use, not for
industrial or professional use. It is not intended to
be used by guests in hospitality environments such
as bed and breakfast, hotels, motels, and other
types of residential environments, even in farm
houses, areas of the kitchen staff in shops, offices
and other work environments.
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervi-
sion or instruction concerning use of the appliance
by a person responsible for their safety.
This appliance is not a toy. Children should be
supervised to ensure that they do not play with the
appliance.
Stay alert, Watch you are doing and use common
sense when operating a power tool. Do not use a
power tool while you are tired or under the influ-
ence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result
in serious personal injury
Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will
reduce personal injuries.
Prevent unintentional starting. Ensure the switch
is in the off-position before connecting the power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on
the switch or energizing power tools that have the
switch on invites accidents
Remove any adjusting key or wrench before
turn-ing the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in per-sonal injury
Do not overreach. Keep proper footing and bal-
ance at all times. This enables better control of the
power tool in unexpected situations
ORIGINAL instructions