Casals AG115500 Instrucciones Originales página 7

bit will be HOT and will burn!
Exercise precaution after employing the stop
opera-tion on the appliance as the tool will con-
tinue moving from the effect of its own mechanical
inertia.
Always wait until the machine has come to a com-
plete stop before placing it down. The tool insert
can jam and lead to loss of control over the power
tool.- Fully unroll the appliance's power cable
before each use.
Check the position of power cables before
commenc-ing work ensuring they are well away
from the work area.
Keep hands and other body parts well away from
the work area whist the tool is in use.
Keep hands and other body parts well away from
the discs while the angle grinder is in use. Do not
attempt to remove cut material whilst the angle
grinder is in op-eration or reach underneath for any
reason.
Do not use the appliance if the parts or accesso-
ries are not properly fitted.- Do not use the appli-
ance if the accessories or consumables attached
to it are defec-tive. Replace them immediately.
Use the appliance handle/s, to catch it or move it.
Unplug the appliance from the mains before re-
placing any accessory.
Unplug the appliance from the mains when not in
use and before undertaking any cleaning task.
This appliance is for household use only, not
profes-sional, industrial use.
This appliance is not a toy. Children should be
super-vised to ensure that they do not play with the
appliance.
Take special care about discs and tools, they may
be stored fixed on the appliance and used accord-
ing to the manufacturer's instructions.
Do not use separator or reducing bushings, adapt-
ers to fix the discs / tools they are not directly
compatible with the appliance.
Do not use cutting discs on deburring operations.
Do not expose to extreme temperatures or strong
magnetism.
Keep the appliance in a dry, dust-free place, out of
direct sunlight.
Always check the workpiece before operation and
re-move any obstructions such as nails, staples,
screws, string, rags, cloths and other debris.
Before cutting ensure there is a suitable gap below
the workpiece to prevent the disc from touching
any obstacles.
Only use the appliance for carrying out dry tasks.
Never rest the appliance into a surface while in
use.
Do not use the appliance on any part of the body
of a person or animal.
Let the appliance running with no load for 30
sec-onds in a safe position. If you notice serious
vibration or other defects stop the appliance imme-
diately. Then check the problem and /or proceed
as we describe on.
Anomalies and Repair clause
Product description and Specifications
A. Start-up switch
B. Auxiliary handle
C. Disc protector
D. Ventilation openings
E. Spindle blocking button
F. Spindle
H. Support plate
I. Disc (not included)
J. Clamping nut
K. Tightening key
L. Guard
M. Bolt
Instructions for use
Before use:
Make sure that all the product's packaging has
been removed.
Before connecting the power cord to the mains
power supply ensure the switch is in the off posi-
tion.
Ensure the auxiliary handle is fitted correctly
before use.
Prepare the appliance according to the function
you wish to use:
Fitting safety devices
Fitting the disc guard (Fig.5)
Never use the machine without guard. Keep
guards in place.
The guard should be positioned so the closed side
of the guard points towards the operator.
Unplug the appliance from the mains.
Fit the collar of the guard (L) on the flange of the
ap-pliance.
If the guard doesn't fit in the flange, loosen the bolt
(M).
Turn the guard to the desired working position.
Tighten the screw (M) in a clockwise direction.
Fitting the auxiliary handle
Unplug the appliance from the mains.
Use of the auxiliary handle is obligatory in order to
ensure greater control and safety when handling
the tool. The auxiliary handle (B) must be screwed
on to the right or left side, depending on the type of
work to be carried out.