Setting Of The Alarm Time (Fm Version); Setting Of The Alarm Time (Dab Version); Deactivate The Alarm; Snooze - THOMSON CR80 Instrucciones De Funcionamiento

Setting of the alarm time (FM version)

The system must be in standby mode in order to set the alarm.
1) Press and hold the "VOL - / ALARM 1" button for 2 seconds to entry alarm set mode.
2) The hour digits start flashing. Use the "SCAN +" & "SCAN -" buttons to set the hour accordingly.
3) Press the "VOL - / ALARM 1" button to confirm the hour.
4) Repeat step 2 and 3 to set the minute.
5) Press the "SCAN +" or "SCAN -" button to select below 1, or 2 for wake-up function.
1 - BUZZ, 2 - SCAN(RADIO)
6) Press the "VOL - / ALARM 1" button to confirm.
7) Use the "SCAN +" & "SCAN -" buttons to set the Alarm volume.
8) Press the "VOL - / ALARM 1" button to confirm. The display will show "AL1".
To set the second alarm time, repeat each of the above steps with the "VOL. + / ALARM 2" button.

Setting of the alarm time (DAB version)

The system must be in standby mode in order to set the clock.
1) Activate alarm setting mode: Press and hold "VOLUME- / ALARM 1" button for 3 seconds.
2) The display will show "Alarm 1 Setup". Press ""VOLUME- / ALARM 1" button to confirm.
3) The hours of the currently set alarm time will start to flash.
4) Press "SCAN+" or "SCAN-" buttons to set the hour. Press "VOLUME- / ALARM 1" button to confirm.
The minute indicator starts blinking.
5) Press "SCAN+" or "SCAN-" buttons to set the minutes. Press "VOLUME- / ALARM 1" button to
confirm.
6) Press "SCAN+" or "SCAN-" buttons to set the Duration. Press "VOLUME- / ALARM 1" button to
confirm.
7) You can use the "SCAN+" or "SCAN-" buttons to choose one of the Alarm mode: BUZZER / DAB
/ FM.
Press "VOLUME- / ALARM 1" button to confirm.
8) You can use "SCAN+" or "SCAN-" buttons to choose the channel and press "VOLUME- / ALARM
1" button to confirm. (Only available in DAB & FM Alarm mode.) Radio stations must be stored
before to allow you to select channel.
9) You can use the "SCAN+" or "SCAN-" buttons to choose one of the Alarm setting:
Daily / Weekdays / Weekends / Once
10) Press "VOLUME- / ALARM 1" button to confirm.
11) Press "SCAN+" or "SCAN-" buttons to set the Alarm volume. Press "VOLUME- / ALARM 1" button
to confirm.
To set the second alarm time, repeat each of the above steps with the "VOLUME+ / ALARM 2" button.

Deactivate the alarm

Press "VOLUME- / ALARM 1" or "VOLUME+ / ALARM 2" button to turn off the alarm.

Snooze

Press "SNOOZE / DIMMER" button to suspend alarm sound for a few minutes. (FM version)
Press "MENU / SNOOZE / DIMMER" button to suspend alarm sound for a few minutes. (DAB version)
The alarm will start again after approx. 9 minutes.
- EN 7 -