Info Display (Dab Version Only); Charge Your Phone - THOMSON CR80 Instrucciones De Funcionamiento

DAB Menu
Press the "MENU / SNOOZE / DIMMER" button to select the DAB radio menu. Press "SCAN+" or
"SCAN-" buttons to chose the following DAB menus and confirm with "ENTER / CLOCK / PRESET"
button:
- Full scan
The radio will automatically perform a full scan of DAB+ stations.
- Manual tune
Select a frequency with "SCAN+" or "SCAN-" button. Press "ENTER / CLOCK / PRESET" button to
confirm.
- DRC
Dynamic Range Control removes or adds the degree of adaptation, required for the differences
in dynamic range between stations.
Select an options with "SCAN+" or "SCAN-" button. Press "ENTER / CLOCK / PRESET" button to
confirm.
Following options are available on the display:
• DRC high: DRC turned on; default setting recommended for noisy environments.
• DRC low: DRC is set to half the normal level.
• DRC off: DRC is turned off.
- TA (Traffic announcement)
Traffic information can be received manually or automatically with the TA function.
Select an options with "SCAN+" or "SCAN-" button. Press "ENTER / CLOCK / PRESET" button to confirm.
- Prune
It may be that you can no longer receive some stations after a station scan or change of location. With
this function you can delete these stations from the reception list. Select "YES" and confirm with the
"ENTER / CLOCK / PRESET" button.
- System
• Time
You can use the "SCAN+" or "SCAN-" button to select the desired sub-menu and confirm with "ENTER /
CLOCK / PRESET" button.
<Set Time/Date> manual time and date setting
<Auto update> Choice of FM Update, DAB Update, Any or No Update
<Set 12/24 hour> Choice of 12 or 24 hour format
<Set date format> Choice of DD-MM-YYYY or MM-DD-YYYY
• Language
You can use the "SCAN+" or "SCAN-" button to select the language and confirm with "ENTER / CLOCK /
PRESET" button.
• Factory Reset
Select an options with "SCAN+" or "SCAN-" button. Press "ENTER / CLOCK / PRESET" button to confirm.
• SW version
You can see the current SW version of the unit.

Info display (DAB version only)

Press the "INFO / SLEEP" button to show the DAB information.

Charge Your Phone

You can charge your phone via USB charger slot.
1) Connect an external device via a USB cable(cable not included) to the USB charging port on the
back of the device for charging.
2) The charge state is indicated in your external device as usual.
- EN 10 -