PC Locs Carrier 10 Charging Station Instrucciones Para El Usuario página 3

STEP 1 - Unpacking the Carrier 10 Charging Station
After unpacking, open the door and remove the baskets.
If you have devices that can fit in the plastic baskets, remove the Stainless Steel
Device Rack and mat, otherwise leave it in place.
STEP 2 - Removing the Stainless Steel Device Rack
Push the top edge down to release the top of the
Stainless Steel Device Rack.
INSTRUCTION MANUAL
Carefully tilt and lift the bottom of Stainless Steel
Device Rack. Avoid scratching the cabinet base.