PC Locs Carrier 10 Charging Station Instrucciones Para El Usuario página 4

Carrier 10 Charging Station™
STEP 3 - Routing the cables
Open the charge compartment by sliding the lid
out. NOTE: Door must be open to slide the lid out.
Push the device connector through the hole and
then pull along the rubber grip cable holder.
STEP 4 - Assembling your devices in the Carrier 10 Charging Station
Place the basket with the devices into the Carrier
10 Charging Station.
Plug in the device chargers. NOTE: US power
outlets pictured for illustration purposes. Country
specific outlets will be sent with your product.
Repeat for the remaining device chargers.
Connect the cable to the device.