Hose; How To Clean; Turbo Tool - Hoover UH71230RM Manual Del Propietário

Tabla de contenido

Publicidad

HOse

To reduce the risk of personal injury - Unplug before cleaning or servicing.

How to Clean

4.25 To remove hose for tool use, press the hose release button (A) and pull
hose end out.
Clear away debris or obstructions from hose. Do not use sharp objects to clean out hose as they
can cause damage. To lock back into place, push hose into hose tube until you hear a click.

TurBO TOOl

CauTIOn
!
To reduce the risk of injury from moving parts - Unplug
before servicing.
How to Clean
4.26 Turn tool so bottom faces up. Rotate the latches (A) on
either side of tool.
4.27 Remove bottom plate (B).
4.28 Remove any debris and/ or hair from brushroll.
Replace bottom plate by aligning tabs along front edge of tool.
Rotate latches back into locked position.
CauTIOn
!
Not to be used for grooming a pet.
luBrICaTIOn
The motor and brushroll are equipped with bearings which
contain sufficient lubrication for their lifetime.
The addition of lubricant could cause damage. Do not add
lubricant to motor or brushroll.
Actual model may vary from images shown.
warnInG
!
!
!
!
4.26
A
4.28
13
4.25
A
4.27
b

Publicidad

Tabla de contenido
loading

Tabla de contenido