Handle Positions; Hose And Tool Use; Hose Mode - Hoover UH72400RM Manual De Propietario

HANDLE POSITIONS

2.6 The handle of your
cleaner has two
positions: upright for
storage and when
using cleaning tools;
operating position for
general operation on
carpet and floors; hold
nozzle with foot (E)
and pull handle back.
Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in upright position.
WARNING
!
Unplug vacuum before connecting hose, wand or tools.

HOSE MODE (

Cleaner must be in the upright position.
3.1 Remove the hose connector (A) from storage
position.
3.2 Plug in hose connector by flipping down hose
connector door (B) insert hose connector (A) until it
clicks.
CAUTION
!
Hose connector must be removed and placed
back into storage position for general operation
on floors.
2.6

3. HOSE AND TOOL USE

Above Floor Cleaning
!
!
Not to be used for grooming a pet.
E
!
)
3.1
A
7
CAUTION
3.2
A
!
B