Stair Cleaning; Cord Rewind & Storage; How To Clean Tools; Maintenance - Hoover UH71230RM Manual Del Propietário

Tabla de contenido

Publicidad

sTaIr CleanInG

3.4 Use the Hose and Turbo Tool (Tool varies per model) for stair cleaning.
Use extra care when cleaning on stairs. To avoid personal injury or damage, and to
prevent the cleaner from falling, always place cleaner at bottom of stairs on floor. Do
not place cleaner on stairs or furniture, as it may result in injury or damage. When using
tools, always ensure handle is in the upright position.
COrD rewInD anD sTOraGe
3.5 To return cord for storage, hold plug and press down
Cord Release Pedal (B) on side of cord reel.
warnInG
!
Hold plug when rewinding onto cord reel. Do not allow
plug to whip when rewinding.

HOw TO Clean TOOls

To clean Hose and Turbo Tool, wipe with a damp cloth. DO NOT submerge in water.
Other cleaning tools may be washed in warm water with a detergent. Rinse and air dry 24 hours before using.
Familiarize yourself with these home maintenance tasks as proper use and care of your vacuum
will ensure continued cleaning effectiveness.
4.1 The System Check Indicator located at (A), alerts you to possible system performance issues.
PrOBleM
POssIBle Cause
If System Check
1. Rinsable filter and/or filter made with HEPA
Indicator is red:
media is dirty.
2. Dirt cup is full and/or clogged.
3. Cyclone filter assembly is clogged.
Any other servicing should be done by an authorized service representative.
If appliance is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a service center
prior to continuing use.
Actual model may vary from images shown.
CauTIOn
!
!

4. MaInTenanCe

!
3.5
POssIBle sOluTIOn
1. Clean rinsable filter and/or filter made with HEPA media
- reference pg. 9 and 10
2. Empty dirt cup - reference pg. 9
3. Clean cyclone filter assembly per pg. 10.
8
3.4
b
4.1
A

Publicidad

Tabla de contenido
loading

Tabla de contenido