Vacuum Controls; Carpet Cleaning; Hard Floor Cleaning; Edge Cleaning - Hoover SH40050 El Manual Del Propietario

VaCuuM Controls

IMPORTANT
Operate cleaner only at voltage specified on the
data plate on the underside of the cleaner.
handle/hose Grip (fig. 2.5)
1 brushroll On/Off button
Push to turn Brushroll on and off.
2 Suction Control Valve
To clean delicate fabrics, slide the Suction
Control Valve to the open position to lower the
suction.
Slide as shown to open and close the Valve.
nozzle (fig. 2.6)
3 Handle Release Pedal
Step on the Handle Release Pedal to lower hand
grip into cleaning position.
IMPORTANT
Brushroll will not run until handle is released.
Carpet
CleaninG
2.7 After attaching the
Power Nozzle, set the
Floor Selector to the
proper setting for your
carpet type. Reference
the "Vacuum Controls"
section under "How to
Operate" for carpet
settings of Power
Nozzle.
edGe
CleaninG
2.9 Guide side
Nozzle parallel to edge
of carpet or furniture as
shown.
2.7
2.9
of
2.5
1
2.6
hard floor
CleaninG
2.8 Power Nozzle is
recommended
vacuuming wood,
laminate coverings
and ceramic
surfaces. Simply push
brushroll button
handle to off and begin

hard floor cleaning.

stair
CleaninG
2.10 Clean stairs from
bottom to top.
IMPORTANT
Take extra care when vacuuming stairs. Do not
store canister in vertical position.
7 Actual model may vary from images shown.
CLOSED - OPEN
2.8
for
floor
on
2.10
2
6