Jole traver shield Manual De Instrucciones página 7

2. Press the Isosafe adjusting
button to pull out the Isosafe
connectors.
11
Rotate the Isosafe connectors 180
degrees until they are pointing in
the direction of the ISOFIX guides.
12
9
11
12
2
1
2
1
3. Line up the Isosafe connectors
with the ISOFIX anchor points,
and then click both Isosafe
connectors into the ISOFIX
anchor points.
13
! Make sure that both Isosafe
connectors are securely
attached to their ISOFIX
anchor points. The colors of
the indicators on the both
Isosafe connectors should be
completely green.
-1
13
! Check to make sure the
booster is securely installed
by pulling on the both Isosafe
connectors.
4. To remove the booster:
a. Press the secondary lock
button -1 first and then the
14
button -2 on the Isosafe
14
connectors before removing
the booster from the vehicle
seat.
b. Rotate the Isosafe
connectors by 180 degrees,
then press the Isosafe
adjusting button to fold the
Isosafe connectors.
15
13
1
14
1 2
10