Packet Data Settings - Nokia N85 Manual Del Usuario

not needed. In an ad hoc network, all devices must
use the same WLAN network name.
WLAN security mode
●
used: WEP, 802.1x, or
WPA/WPA2 are not available for ad hoc networks).
If you select Open
The WEP, 802.1x, and WPA functions can be used
only if the network supports them.
Homepage — Enter the web address of the starting
●
page.
Use access point
●
you want the device to ask for confirmation before
the connection using this access point is created or
Automatically
the destination using this access point
automatically.
The available options may vary.

Packet data settings

Press , and select
Connection Packet
>
The packet data settings affect all access points using
a packet data connection.
Packet data connection
●
available and you are in a network that supports
packet data, the device registers to the packet data
network. Starting an active packet data connection
160
(for example, to send and receive e-mail) is quicker.
— Select the encryption
WPA/WPA2 (802.1x and
network, no encryption is used.
— Select After confirmation
if you want the device to connect to
Tools Settings
> >
data.
— If you select
If there is no packet data coverage, the device
periodically tries to establish a packet data
connection. If you select
uses a packet data connection only if you start an
application or action that needs it.
Access point
●
to use your device as a packet data modem to a
compatible computer.
High speed packet access
●
use of HSDPA (network service) in UMTS networks.
if
Wireless LAN settings
Press , and select
Connection
Show WLAN availability
●
displayed in the standby mode when a wireless LAN
is available.
Scan for networks
●
availability
searches for available wireless LANs and updates the
indicator.
To view advanced settings, select
Advanced settings. Changing wireless LAN advanced
settings is not recommended.
When
SIP settings
Press , and select
Connection
When needed, the device
— The access point name is needed
— Enable or disable the
Tools Settings
>
Wireless LAN.
>
— Select whether
— If you set Show WLAN
to Yes, select how often the device
Options
Tools Settings
>
SIP settings.
>
>
is
>
>