S e t t i n g s
When needed
— to set the packet data registration and connection to established
when an application using packet data needs it and closed when you end
the application.
Always online
— to set the phone to automatically register to an packet data
network when you switch the phone on.
or
indicates that the GPRS or
EGPRS service is available.
If you receive a call or a text message, or make a call during a GPRS or EGPRS
connection,
or
indicates that the GPRS or EGPRS connection is suspended
(on hold).
Packet data settings
You can connect the phone using Bluetooth wireless technology, infrared, or USB
data cable connection to a compatible PC and use the phone as a modem to
enable EGPRS or GPRS connectivity from the PC.
To define the settings for EGPRS or GPRS connections from your PC, select
Menu
>
Settings
>
Connectivity
>
Packet data
>
Packet data settings
>
Active access
point, and activate the access point you want to use. Select
Edit active access
point
>
Alias for access
point, enter a name to change the access point settings, and
select OK. Select
Packet data access
point, enter the access point name (APN) to
establish a connection to an EGPRS or GPRS network, and select OK.
You can also set the EGPRS or GPRS dial-up service settings (access point name) on
your PC, by using the One Touch Access software. See "Nokia PC Suite," p. 72. If you
have set the settings both on your PC and on your phone, the PC settings are used.
Data transfer and synchronization
Synchronize your data from calendar, notes, and contacts with another compatible
device (for example, a mobile phone), a compatible PC, or a remote Internet
server (network service).
Your phone allows data transfer with a compatible PC or another compatible device
when using the phone without a SIM card. Note that when you use the phone
without a SIM card, some functions appear dimmed in the menus and cannot be
used. To synchronize with a remote Internet server is not possible without a SIM card.
To copy or synchronize data from your phone, the name of the device and the
settings must be in the list of partners in transfer contacts. If you receive data
from another compatible device, the partner is automatically added to the list,
using the contact data from the other device.
Server sync
and
PC sync settings
are the original items in the list.
44