SCHUBERTH SHP 28-C Instrucciones De Uso página 9

Carefully read these user instructions!
ȫ The hearing protector must be used at all times in noisy environments t
o provide the full protection effect! Only 100 % wear time provides
full protection.
ȫ The audibility of warning signals at a specific workplace may be impaired
if over protected, when using a hearing protector with a too high noise
attenuation performance in relation to the noise environment.
ȫ Certain chemical substances can have a destructive effect on this
product. More information is available from the manufacturer.
ȫ Ensure that the hearing protectors are regularly inspected for
serviceability.
ȫ The hearing protector's noise attenuating properties can dramatically
decrease with usage of for example thick spectacle frames,
ski masks / balaclavas, etc.
ȫ Use of perspiration/hygienic protection over the sealing rings can reduce
the hearing protector's noise attenuation properties.
ȫ Earmuffs, and in particular cushions, may deteriorate with use and should
be examined at frequent intervals for cracking and leakage.
ȫ Immediately discard the product if showing signs of cracks or damage.
ȫ Hygiene kit should be changed at least twice per year. Make sure you
choose the correct hygiene kit for your hearing protector.
ȫ Clean the product with mild soap. You must be sure that the detergent
you use does not irritate the skin. Do not dip the product in water.
ȫ The hearing protector must be stored in a dry and clean environment out
of direct sun light, e.g. in its original packaging.
Fitting & adjustment
Brush away all hair from the ears and place the hearing protectors over the
ears so that they fit comfortably and snugly. Ensure that the ears are com-
pletely enclosed by the hearing protectors and that you have even pressure
around the ears.
Helmet / Cap mount
Push the hearing protectors helmet attachment into the helmet slot until
it locks into position. Place the hearing protectors over the ears and press
9