Starting The Device - Leister MINIFLOOR Instrucciones De Funcionamiento

Work environment/Safety
The device should only be used in the open or in a well-ventilated area. Be careful not to burn the material during
welding.
Follow the safety precautions provided by the manufacturer for the material.
Prior to commissioning, check the power supply cord (1), the plug, and the extension cable for
electrical and mechanical damage. Use extension cables with protective conductors only!
The MINIFLOOR must not be used in areas with explosion and/or ignition hazards. Ensure
a stable position during work. The power supply cord (1) must be able to move freely and
must not hinder the user or third parties while working.
Place the MINIFLOOR on a horizontal, fire-
proof support and ensure sufficient distance
from flammable materials and explosive
gases!
Swivel the hot air hand tool (22) into the
parking position during interruptions or to
cool it down (see image below). To transport,
allow the device to cool and switch off the
main switch (6).

Starting the device

Prior to commissioning, check the power supply cord (1), the plug, and the extension cable
for electrical and mechanical damage.
Switch off the MINIFLOOR (6) and hot air hand tool (22) main switches.
The nominal voltage, specified on the devices must match the mains voltage. Connect the device to
the nominal voltage.
In the event of power failure , swivel the hot air hand tool (22) into the parking position.
Do not point the hot air flow at people or animals.
Place the MINIFLOOR on the floor to be wel-
ded and swivel the hot air hand tool (22)
into the parking position. Unlock guide arm
lock (19).
Place the guide wheel (3) in the groove for
the welding rod. Switch the MINIFLOOR on
via the main switch (6).
Switch the hot air hand tool (22) on using the
appropriate switch.
Adjust the welding parameters for the hea-
ting, and – if available – the blowers.
For the hot air hand tool settings, please ob-
serve the operating instructions of the device
in use.
20
6
6
22
1
22
1
19
3