Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Welding Sequence
Preparation
Carry out test welds according to the welding instructions from the material manufacturer and the
national standards or directives. Check the test weld.
• Adjust the welding speed, heating, and blowers.
• It is important to reach the welding temperature (heating time approx. 3–5 min).
Risk of entanglement!
Start of the welding process
• Insert the welding rod into the rapid
welding nozzle (24).
• Swivel the hot air hand tool (22) down-
wards, the drive motor starts automati-
cally.
• Ensure that the guide wheel (3) remains
in the groove.
Welding Sequence
• Without the unwinding device, guide the
welding rod through the lug (17).
End of the welding process
• Once the welding process is complete,
swivel the hot air hand tool (22) into the
parking position.
• The drive motor stops automatically.
Fingers, hair, or items of clothing can be drawn in.
With unwinding device
24
Without unwinding device
17
22
3
22
21
Publicidad
Tabla de contenido
