Print Settings; Machine Parameters - Carl Valentin Dynacode Serie Instrucciones Abreviadas Y Recomendaciones De Seguridad

Print settings

Keys:
Key:
Continuous mode
Intermittent mode
Key:
Key:

Machine parameters

Continuous mode
Keys: ,
Key:
Mode:
Selection of operating mode.
Key:
Print Offset:
Distance of the layout to the zero point of machine.
Value range: 1 ... 999 mm
Key:
Print position:
Start position of print carriage in mm.
Value range: 12 ... 93 mm
Key:
Layouts/cycle:
Indication of number of printed layouts per print start (cycle).
Value range: 1 ... 25 layouts per cycle.
Contrast:
Value range: 10% ... 200 %.
Speed:
Value range: 50 mm/s ... 200 mm/s.
Contrast:
Value range: 10% ... 200 %.
Ribbon control:
Examination if the transfer ribbon roll is to end or if the ribbon was torn at the unwinding roll.
Off: The ribbon control is deselected, i.e. the direct print module continues without an error
message.
On: The ribbon control is selected, i.e. the current print order is interrupted and an Error
Message appears at the display.
strong sensibility: The direct print module reacts immediately to the end of the transfer
ribbon.
weak sensibility: The direct print module reacts at approx. 1/3 more slowly to the end of the
transfer ribbon.
X displacement:
Indication of displacement in X direction. The fields on the layout are moved.
Value range: −90.0 to +90.0.
English
Intermittent mode
Keys: ,
Key:
Mode:
Selection of operating mode.
Key:
Back-Speed: Indication of back speed of the print mechanics
after print end in mm/s.
Value range: 50 ... 600 mm/s.
Key:
Print Offset:
Distance of the layout to the zero point of machine.
Value range: 1 ... 999 mm
Key:
Print position:
Start position of print carriage in mm.
Value range: 12 ... 93 mm
Dynacode
99