Order Information; Order Number - ACS contsys Flowcont M Manual De Instrucciones

8

Order information

M –Mini flowmeter
010 = DN10
015 = DN15
025 = DN25
050 = DN50
Liner material
P....PVDF (max. 110 °C) (DN50)
E....PEEK (max. 110°) (DN10, 15, 25)
_ _ _ 0 _ _ 2 S
Flowcont M
Earthing electrodes are integrated in the sensor as standard.
A transformer for connecting the meter to a 230 V ac power supply is available as an option.
Part-no. D164B002U08
Option:
Threaded adapter
For DN 15 3/4" to 1" External thread ..................................................... GA-034-100
For DN 25 1 1/4" to 1 1/2" External thread ............................................. GA-114-112
For DN 50 2 1/2" to 2 3/4" External thread ............................................. GA-212-234
Comment:
The function of the optocoupler for the pulse output can be changed over using software. This either
functions
as a pulse output or contact output. The function can only be changed in the version with a display!
The preferred versions have grey backgrounds.
GB26
Process connection
E ... Male thread acc. to ISO 228
N... NPT male thread
Meas./earthing electrode material
0.... Hastelloy C4
Display / In-/outputs
0 ....without Display, Impulse output Opto
1 ....without Display, Impulse output Opto + 20mA Signal
2 ....with Display, Impulse output Opto
3 ....with Display, Impulse output Opto + 20mA Signal
4 ....with Display, Impulse output Opto + contact input Opto
Measuring accuracy
P....3 % of the measurement (Standard)
M ...1,5 % of the measurement
Auxiliary power
2 ... Low voltage 16,8V - 26,4V AC / 16,8V - 31,2V DC
S ... Standard

Order number

FlowcontM
8 Order information
D184B112U04