Maintenance And Cleaning; Filtering System; Filter Assembly - Brandy Best RED6D Manual De Instrucciones

7.Maintenance and Cleaning

Filtering System

The filter prevent larger remnants of food or other objects from getting inside the pump.

Filter assembly

The filter efficiently removes food particles from the wash water, allowing it to be recycled during the cycle.
For best performance and results, the filter assembly must be cleaned regularly. For this reason, it is a good idea
to remove the larger food particles trapping in the filter after each wash cycle by rinsing the filter and cup under
running water. To remove the filter assembly, pull the cup handle in the upward direction.
!
WARNING!
Open
NOTE:
!
If do it from step1 to step 3, the filter system will be removed; while if do it from Step 3 to Step 1,
the filter system will be installed.
Never run the dishwasher without the filters in place.
The dishwasher must never be used without the filters.
Improper replacement of the filter may reduce the performance level of the appliance
and damage dishes and utensils.
Step 1 Contrarotate the filter assembly(A,B and C),
then lift it all up.
Step 2: Lift B and C up from A;
Step 3: Separate B and C.
The filter system consists of a coarse filter, a flat (Main filter)
and a micro filter (fine filter).
A
Main filter
Food and soil particles trapped by this filter are pulverized by a
special jet on the spray arm and washed down to drain.
B
Fine filter
This filter holds soil and food residues in the sump area and
prevents it from being redeposited on the dishes during a cycle.
C
Coarse filter
Larger items, such as pieces of bone or glass, that could block
the drain are trapped in the coarse filter. To remove the items
caught by this filter, gently squeeze the tap on the top of this
filter and lift it out.
16