ResMed AirMini Manual Del Usuario página 13

Unplug the machine
1. Disconnect the AirMini
tubing from the machine
by pressing the side
buttons on the cuff and
pulling it away.
2. Unplug the power supply
unit from the power
outlet and the machine.
For mask disassembly instructions, see your mask user guide.
Cleaning and replacing parts
Detach all components according to the disassembly instructions and
make sure that the HumidX/HumidX Plus is removed and stored in a
clean, dry location.
Inspect the HumidX/HumidX Plus
1. Check daily for any signs of damage or blockages caused by dirt or
dust.
2. It must be replaced within 30 days after opening.
3. When the HumidX/HumidX Plus is not being used, store it in a clean,
dry location.
Note: HumidX/HumidX Plus cannot be washed.
English 11