Switching The Headset On/Off - HP iPAQ Manual De Instrucciones

Switching the Headset On/Off

To switch the headset on:
1. Press the "Talk" button for about five seconds until you hear a low tone
followed by a high tone. The LED indicator flashes blue four times.
2. The Headset switches on and enters standby mode. The LED indicator continuously flashes blue
every three seconds.
To switch the headset off:
1. Press the "Talk" button for about one second until you hear a high tone followed by a low tone.
The LED Indicator flashes red four times.
2. The Headset switches off and the LED indicator no longer blinks.
9