Taking Selfies; Using The Mini Tripod - Silvercrest SSBS 3.0 A1 Instrucciones De Uso

Taking selfies
♦ Release the lock of the telescopic shaft 4 by turning it
anticlockwise.
♦ Pull out the telescopic shaft 4 to the desired length. Turn the
individual elements of the telescopic shaft 4 clockwise to
lock them in place.
♦ If you want to unlock the telescope shaft 4 again, turn the
individual elements in the opposite direction (anticlockwise).
♦ Switch on the camera function on your smartphone.
♦ Press the
smartphone will take a picture. The operating LED 0 briefly
flashes blue once.
NOTE
► If the button q is not pressed for approx. 6 minutes, the
remote release 8 switches off automatically.

Using the mini tripod

♦ Screw the mini tripod 1 into the ¼ inch thread 7 on the
bottom of the handle 5.
♦ Always pull the legs of the mini tripod 1 fully apart for
maximal stability.
SSBS 3.0 A1
button q on the remote release 8. Your
│
11 ■
GB