Mode of Operation
When the suction motor of the machine is on, the air will be led
through the machine and will collect the dust particles near the
nozzle mounted.
The dust particles will be sucked through the hose into the
collection container, where the majority of the particles will
be held back in the collection bag and/or the pre-filter /
membrane filter.
14
IMPORTANT!
As the motor leads the cooling air through the machine,
all filters MUST be mounted and intact
IMPORTANT!
Never cover up the motor top when the machine is in use.
IMPORTANT!
Never collect warm or glowing materials.
IMPORTANT!
Never collect warm or glowing materials.
The air flow and the remaining particles, which have not been
held back inside the collection bag or the pre-filter / membrane
filter, will be carried forward to the HEPA filter.
From the HEPA filter the purified air flow will continue through
the suction pump (blow through) and will be led out of the
vacuum cleaner through the exhaust and noise reduction
filters.
DCS25 Manual