Safety Precautions - Bona DCS25 Manual De Funcionamento

Safety Precautions

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.
• The appliance is NOT approved for collection of flammable,
explosive, poisonous or extremely health hazardous dust,
fluids or gasses.
• DO NOT USE THE VACUUM CLEANER WITHOUT A
PROPER GROUND CONNECTION. This vacuum cleaner
is designed to be used with a grounding connection, in
an installation with HFI or HPFI. The user is responsible
for ensuring that the wall outlet is grounded. The ground
connection of the plug must NOT be removed.
• BONA DCS25 must be connected to 230 V power supply.
Make sure that the voltage and safety fuse of the power
supply correspond with the data of the data plate and the
information given in this manual.
• BONA DCS25 may be used for collection of dust hazardous
to health according to CEI/IEC 60335-2-69 Annex AA, dust
class
• The appliance must be emptied after use.
• The user must ensure that the appliance is adjusted to the
task and that regulatory requirements are met.
• When collecting dust hazardous to health you must use
a collection bag, and disposal must comply with the legal
requirements for material (closed container, plastic bag etc.).
• Avoid damaging the supply cord. When replacing the supply
cord, only use an original supply cord (see the spare parts
list). The replacement must be carried out by an authorized
dealer or an equally qualified person in order to avoid
danger. Regularly check the mains connection for damage,
such as fissures or ageing. If damage is found, the supply
cord must be replaced before further use.
• The plug must be removed from the power supply before
repair and maintenance or cleaning operations.
• The mains socket of the machine is to be used only for the
purposes specified in the user manual.
• This machine is intended for commercial use, e.g. in hotels,
schools, hospitals, factories, shops, offices and rental
businesses.
• Before use operators should be provided with information,
instruction and training for the use of the appliance and the
substances for which it is to be used, including the safe
method of removal and disposal of the material collected.
4
• For user servicing, the appliance must be dismantled,
cleaned and serviced, as far as is reasonably practicable,
without causing risk to the maintenance staff and others.
Suitable precautions include decontamination before
dismantling, provision for local filtered exhaust ventilation
where the appliance is dismantled, cleaning of the
maintenance area and suitable personal protection.
• In the case of class H appliances the outside of the
appliance should be decontaminated by vacuum cleaning
methods and wiped clean or treated with sealant before
being taken out of a hazardous area. All the appliance parts
shall be regarded as contaminated when removed from the
hazardous area and appropriate action taken to prevent
dust dispersal.
• The manufacturer, or an instructed person, shall perform
a technical inspection at least annually, consisting of, for
example, inspection of filters for damage, air tightness of the
appliance and proper function of the control mechanism.
On class H appliances the appliance filtration efficiency
should be tested at least annually, or more often, according
to national requirements. The test method that may be
used for the verification of the appliance filtration efficiency
is given in AA.22.201.2. If the test is not passed, it must be
repeated with a new essential filter.
• When carrying out service or repair operations, all
contaminated items, which cannot be satisfactorily cleaned,
are to be disposed of. Such items shall be disposed of in
impervious bags in accordance with any current regulation
of the disposal of such waste.
• The upper part of the motor top is not a dust proof
compartment, and when cleaning, the covers of this
compartment are removed by loosening the screws fixing
the covers.
DCS25 Manual