Breitling EXOSPACE B55 Manual Del Usuario página 26

• For , turn the crown to select whether to record both times: block times
TIMEMST
and flight times ( ) or only flight times (
BLoCK
• Confirm the setting by pressing P1 and/or pushing th e crown back into neutral
position 1.
b) Recording a block time with the flight time
• Select the function by turning the crown; the seconds hand
CHRFLGT
automatically positions itself on 0 and becomes the chronograph hand. It
returns to its usual function when the "flight time' chronograph mode is
exited.
• If one or more "block times" are already memorized, a space in the memory
must be activated before starting a new recording. This operation is done by
pressing P1 for a long time: the lower screen displays
• As soon as the machine begins to move, start the chronograph by pressing
P1 (the upper screen displays
BLCKoFF
minutes and seconds of the block time. The chronograph seconds hand follows
the digital seconds.
• When taking off, press P1 a second time (the screen will display
the counter at 6 o'clock will return to 0 (flight time).
• When landing, press P1 a third time (the screen will display
counter at 6 o'clock will stop and flash the flight time for ten seconds. The coun-
ter at 6 o'clock then displays the block time.
).
FLIGHT
: : .
-- -- --
). The lower screen displays the hours,
TAKEoFF
) and the
LANDING
46
• When the machine stops, press P1 a fourth time (the screen displays
followed by
the recording, but in this case, only the block time will be incremented.
• Before starting a new recording, a place in the memory must be activated with
a long press on P1: the lower screen will display
N.B.: Only one flight can be measured at once.
N.B.: If the flight recording remains in use for more than 99 hours, 59 minutes and
59 seconds, it will stop automatically and the upper screen will display
overflow).
c) Recording a "flight time" only
• Select the
automatically move to 0 and become the chronograph hand. It will return to
normal as soon as the "flight time" chronograph mode is exited.
• If one or more block times are already memorized, a place in the memory must
be activated before starting the new recording. This operation is achieved by a
long press on P1: the lower screen displays
) and
• Start the chronograph by pressing on P1 (the upper screen will display
The lower screen displays the hours, minutes and seconds. The seconds hand of
the chronograph follows the digital second.
• Stop the recording by pressing on P1 a second time (the upper screen will display
followed by
LANDING
xx ) and displays the block time. Pressing P1 again will continue
B ADD
function by turning the crown; the seconds hand will
CHRFLGT
:
-- --
xx ). Pressing P1 again will continue the recording.
B ADD
47
BLoCKoN
: : .
-- -- --
(for
Bxx oVF
: .
--
).
TAKEoFF