Vollrath 59500 Manual Del Operador página 4

K
°F
°C
L
A
POWER
TIMER
TEMP
F
A
O
M
G
4 O ' M
peratOr s
I
E
Timer
POWER
TIMER
TEMP
J
F
H
Control Panel Example
E
K
L
°F
°C
Timer
I
H
Control Panel Example
N
D B
C
Control Panel Example
anual
A
ON/OFF button. Press to turn unit on. The digital display will
light.
B
HEATING LED light. Illuminates when induction read-
cookware is detected and the unit is heating.
C
UP button. Used to increase the power level or time
depending upon the mode selected and model.
D
DOWN button. Used to decrease the power level or time
depending upon the mode selected and model.
E
DISPLAY panel. This displays the power level, temperature,
timer time or an error code, depending upon the mode
selected and the model.
F
POWER/TEMP button. Used to change the display panel
read out from power to temperature.
G
TEMPERATURE LED light. Illuminates when the unit is in the
temperature mode. This light is constant or blinks depending
on the model.
J
H
TIMER button. Used to switch on and start the timer function.
I
TIMER LED light. Illuminates when timer function is
operating.
J
CONTROL knob. Used to control the temperature, power
level or time, depending on the mode selected or model.
Rotating the knob clockwise increases the number(s).
Rotating the knob counterclockwise decreases the
number(s).
K
ºF LED light. Illuminates when the temperature is being
A
displayed in degrees Fahrenheit.
L
ºC LED light. Illuminates when the temperature is being
displayed in degrees Centigrade.
M
HEAT/TEMP button. Used to switch between temperature
display and heat display modes.
N
HEAT RANGE and TEMPERATURE LED lights. Shows a
heat range between low and high (nine settings). Or, shows a
temperature value using temperature (seven settings).
O
HEAT RANGE LED light. Illuminates when the heat range
display mode has been selected. This light flashes when
activated.