VWR Mini Shaker 444-0268 Manual De Instrucciones página 8

M S S -U
ICroPlaTE hakEr ET P
The Microplate Shaker is designed to hold two (2) or four (4) microplates, or two (2) Micro-Tube Racks.
1. Place two (2) microplates or deep well blocks diagonally on the tray, or place four (4) microplates or deep well blocks on the tray. The plates/blocks
do not have to be filled.
2. Place the corner of the plate/block under the spring located at each corner of the tray.
3. Slide plate/block into place. You are ready to use
2.
M S T C
ICroPlaTE hakEr ray oNfIgUraTIoNS
(2) microplates
7
.
3.
(4) microplates
4.
NoTE: The tray on the Microplate Shaker is not designed to hold flask clamps.
(2) Micro-Tube Racks
EN