Peristaltic Pumps Mypool Series; Operation; Common Features; Liquid Ends Materials - CTX MyPOOL Serie Normas De Instalacióin, Uso Y Manutencióin

2.0 - PERISTALTIC PUMPS MyPOOL SERIES

2.1 - OPERATION

Peristalsis is a wave of automatic contractions propelling contents along channel or tube, this led to a peristaltic
action. By mechanical simulation of biological peristalsis rollers crush tube walls togheter to form a seal while roller moves along the tube,
then the previously compressed tube regains original form and sucks fluid into the formed vacuum. The fluid will follow the roller until
tube is not compressed any more, then to avoid a flow back a second roller compress the tube, pushing the fluid out of the pump and
repeating the suction action while the pump continues to operate the rollers which are fitted on a special rotor create suction lift and outlet
pressure.

2.2 - COMMON FEATURES

• The products are manufactured according
• Plastic housing in PP
• Level control setting included (supplied without probe)
• Standard power supply (fluctuations not to exceed ±10%):
230 V a.c. 50 Hz single phase.

2.3 - LIQUID ENDS MATERIALS

1 - Hose: Santoprene®
2 - Filter: Standard - Polypropylene
3 - Suction hose: PVC Cristal®
4 - Discharge hose: Polyethylene

3.0 - INSTALLATION

a. - Install the pump in a dry place and well away from sources of heat and, in any case, at environmental tem- peratures not exceeding
40°C. The minimum operating temperature depends on the liquid to be pumped, bearing in mind that it must always remain in a
liquid state.
b. - Carefully observe the regulations in force in the various countries as regards electrical installations (Fig.2). When the supply cable is
devoid of a plug, the equipment should be connected to the supply mains by means of a single-pole circuit breaker having a
minimum distance of 3 mm between the contacts. Before accessing any of the electrical parts, make sure that all the supply
circuits are open.
TECHNICAL CHARATERISTICS
MAX
Type
Flow
l/h
MyPool
1,6
regulation
OVERALL DIMENSIONS (Fig. 1)
MAX Net
Pressure Weight
Bar Kg
1,5 1,5
MAX Overall Dimensions
Height Width
mm mm
220 131
16
Absorbed Rotation
Depth Power
mm Watts
119 10
Tube
Speed Size
rpm mm
30 4 x 7