5.6 – SETTING
PRESS ESC TO GO
OUT FROM THE
MENU
PRESS ESC TO GO
OUT FROM THE
MENU
PRESS ESC TO GO
OUT FROM THE
MENU
PRESS ESC TO GO
OUT FROM THE
MENU
5.7 - SELECTING THE SET POINT
Press the SET click for after 3 seconds until the screen does not appear in "SET POINT" To change the value in the same time click the
button to decrease or increase the value. Note that the pH-value can be set is from 6.8 to 7.8 and the ORP from 300 mV to 900 mV
Push MENU for 5 seconds
LANGUAGE
▼ ENGLISH ▲
Push OK to confirm
SELECT MEASURE
▼
pH ▲
Push OK to confirm
DOSING MODE
▼ ACID (pH-) ▲
Push OK to confirm
EXTERNAL INPUT
▼ OFF▲
Push OK to confirm
19
PUSH ▲ AND ▼
TO SELECT THE
LANGUAGE
PUSH ▲ AND ▼ TO
SELECT THE MEASURE
TYPE
PUSH ▲ AND ▼ TO
SELECT THE DIRECTION
OF WORKING
PUSH ▲ AND ▼ TO
ACTIVATE OR
DEACTIVATE THE
RECIRCULATION PUMP