Toro Flex-Force Power System 51820 Manual Del Usuario página 10

Adjusting the Air Speed of
the Blower
To achieve maximum performance (air speed) , press
and hold the turbo boost button for the desired amount
of time (Figure 4).
To adjust the air speed as you blow, use the
variable-speed trigger
To maintain the current air speed, engage the speed
lock (Figure 4).
Shutting Off the Blower
To shut off the blower, disengage the speed lock (if in
use) and release the variable-speed trigger
Important:
After stopping the blower, do not
leave the speed lock engaged with the battery
pack in the blower.
Whenever you are not using the blower or are
transporting the blower to or from the work area,
remove the battery pack.
Removing the Blower Tube
Press down on the tab latch to separate the blower
tube from the blower (Figure
1. Tube latch
Removing the Battery from
the Blower
Press down on the battery latch to separate the
battery from the blower
(Figure 4).
(Figure
5).
Figure 5
(Figure 6).
1. Battery latch
Charging the Battery Pack
4).
Important:
The battery pack is not fully charged
when you purchase it. Before using the tool for
the first time, place the battery pack in the charger
and charge it until the LED display indicates the
battery pack is fully charged. Read all safety
precautions.
Important:
Charge the battery pack only in
temperatures that are within the appropriate
range; refer to
Note:
At any time, press the battery-charge-indicator
button on the battery pack to display the current
charge (LED indicators).
1. Make sure that the vents on the battery are clear
of any dust and debris.
2. Line up the cavity in the battery pack
with the tongue on the charger.
g273159
8
Figure 6
Charging the Battery Pack (page
g267488
8).
(Figure 7)