Toro Flex-Force Power System 51820 Manual Del Usuario página 11

Figure 7
1. Battery pack cavity
2. Battery pack venting areas 5. LED indicators (current
3. Battery pack terminals
3. Make sure that the vents on the battery charger
are clear of any dust and debris.
4. Slide the battery pack into the charger until it is
fully seated (Figure
Figure 8
1. LED indicator light
2. Charger venting areas
5. To remove the battery pack, slide the battery
backward out of the charger.
4. Handle
charge)
6. Battery-charge-indicator
button
8).
6. Refer to the following table to interpret the LED
indicator light on the battery charger.
Indicator light
Off
Green blinking
Green
Red
Red blinking
*Refer to
information.
g282651
g268087
9
Indicates
No battery pack inserted
Battery pack is charging
Battery pack is charged
Battery pack and/or battery
charger is over or under the
appropriate temperature range
Battery pack charging fault*
Troubleshooting (page 11) for more