Answering A Call - ausdom S7 Manual Del Usuario

7-2 Pairing the earphone with a phone
1. Make sure the earphone is off.
2. Do not place both devices more than one meter away from
each other.
3. Press and hold the power button on the earphone until it
powers on but don't let go just yet. Continue holding down on
the power button until you see the LED indicator flashes blue
and red alternately, which means your earphone is in "pairing
mode" waiting to be paired with your device. You will hear
"Pairing".
4. Start Wireless function on your phone and search for new
devices.
5. Select the "AUSDOM S7" to pair. Once successfully paired,
the blue LED is always on, You will hear "Connected".
Note: The earphone will power off if not paired within 10
minutes.
7-3 Connecting to paired devices
The earphone will pair with the last paired device automatically
when powered on. But for some computers or laptops you will
need to manually pair every time.
8. Taking and Answering a Call
8-1 Taking a call
1. Make sure the earphone is pairing to the mobile phone. Dial
through the mobile phone and press the call button on the
phone.
2.To end a call, press the function button once again or also
end the call directly by the phone.

8-2 Answering a call

Make sure the earphone is pairing with your phone. Please
refer to chapter 7. Pairing with Wireless Devices.
1.When a call rings, the earphone will sound the prompt voice.
2.Press the function button on your earphone or the answer
key on your phone to answer the call.
3.To end a call, press the function button once again or also
end the call directly by the phone.
EN-5