EN
STORAGE
When the appliance is not in use, it should be stored in a dry place.
Make sure to empty the tank, clean and dry the appliance before storing it.
IN THE EVENT OF A PROBLEM
Never dismantle your appliance yourself. n incorrectly repaired appliance can be a danger to the user.
Before contacting an approved Service Centre from our network, make sure that the appliance is in
the normal operating position and the air intake and outlet grills are totally unobstructed.
Type of problem
The appliance does not work when switched on
The humidification capacity is too low
The ambient humidity is too high
Condensation in the room
The appliance is too noisy
The appliance stops
HELP US LOOK AFTER THE ENVIRONMENT!
Your appliance contains many materials which can be reused or recycled.
Take it to a collection point, or if there isn't one near you, to an approved service centre for
disposal.
Points to check
Is the low water level indicator blinking?
Positioning of the appliance (tilt).
Positioning of the tank.
Connection of the appliance.
Required water level not yet reached in the vapo-
risation compartment (wait a few moments).
Doors and windows are closed.
Vaporisation rate too low.
Obstruction of the intake grills and nozzle.
Relative humidity setting.
The room temperature is too low.
Place the appliance on a flat and stable surface
Programmed operating period has run out.
Is the water level indicator blinking?
Optimum humidity level set.
16