Pulsar Digiforce X950 Manual Del Usuario página 4

The device can be powered with an external DC power supply (2.1mm pin)
with stabilised voltage ranging from 8.4V to 15V or a 12V vehicle socket.
External power supply (AC/DC) is to be connected to port (9).
Note: the central pin of the power supply that you connect to the jack of the
device must have marking "+".
The power supply may have marking
Connection of an external power supply (icon
automatically cuts off power supply from batteries.
External power supply DOES NOT charge the batteries in the device!
Attention! We suggest that you use battery packs EPS3 or EPS5
ensuring from 9 to 20 hours of continuous operation.
Objective lens
1
Button "ZOOM" (Digital zoom/SumLight™")
2
3 Button "RF" (rangefinder)
4
Button "IR" (IR Illuminator)
5 Button "ON" (turn the unit on-off/display off)
6
Eyepiece
7 Accessories mount
8 Display brightness adjustment wheel
9 External power supply jack
10 Built-in laser IR Illuminator
LED indicator
11
12
Video output port
6
DATA PANEL ICONS
Function "SumLight
Function "SumLight
15
Display brightness level
x2 2x digital zoom
IR Illuminator power level
Low battery indicator
Indication for external power supply
4
-
+
in the status bar)
" is on
™
" is off
™
1 2
8
9
10
-
+ +
- + + - + +
AV out
(yellow)
3 4 5 6
7
11
12
5