Operating Principles - Gaggenau VZ 400-000 Instrucciones De Utilización Y Montaje

Functions
The appliance features two independent timer
units, which can be adjusted separately.
It is possible to program an automatic switch-off
timer right appliance
time for a Vario appliance. Any value between
1 and 90 minutes can be entered into the timer.
Programming a switch-off time is suitable for
e.g. rice, potatoes, vegetables or stew.
It is possible to select only one or both cooking /
grilling zones on the VC 421 and VC 422 cooktop
timer left appliance
and on the VR 421 grill to be switched off by the
timer.
After the elapse of the programmed time an
audible signal is sounded. The selected cooking
zone is switched off.
It is also possible to use the timer without the
switch-off function. This is suitable for short cooking
times, e.g. deep-frying or roasting.
timer left appliance
Note: only operate electrical cooking appliances
timer right appliance
under supervision.

Operating principles

timer display
The timer is operated by touch control sensors. You
sensor keys
only need to touch the sensor pad with your finger,
for operation
no pressure is required. Every accepted input is
confirmed by an audible signal. To enter a time
sensor keys for
value you can leave the finger on the sensor pad
adjusting the time
until the required time is shown on the display. To
select a cooking zone it is necessary to touch the
sensor pad and lift your finger off the sensor pad
sensor key for
after every change of the value until the desired
cooking zone selection
cooking zone symbol is shown on the display.
cooking zone display
11