Gaggenau VZ 400-000 Instrucciones De Utilización Y Montaje página 15

1
2
Changing or erasing a given value
• Touch any sensor key, until an audible signal is
sounded.
• You can now change the programmed time or the
selected cooking zone using the +/– keys.
or
• You can switch off the timer by pressing the +/–
keys simultaneously, until an audible signal is
sounded. The cooking zone continues to operate
on the selected cooking level without timer.
Programming the timer without switch-off
function
1. Touch any sensor key on the timer, until an
audible signal is sounded. The timer display
flashes 00. Note: touching more than one sensor
key at the same time will not activate the timer.
2. Select the required time using the +/– keys.
Note: if no value is entered within 5 seconds, the
timer has to be activated again.
The value is confirmed a few seconds later and the
timer starts.
After the elapse of the programmed time an
audible signal is sounded. The timer display
flashes. By touching any key on the timer the
audible signal is switched off.
Cleaning
Clean the timer with a soft, damp cloth and light
soapy liquid. The cloth should not be too wet.
13